.png){kind=small}
, then click on REPAIR TABLES.png){kind=small}
and click on the box next to RETRO ACTIVE SET EQUIPMENT RATES. .png){kind=small}
RETRO ACTIVE SET EQUIPMENT RATES
DESCRIPTION: This utility is used to retroactively set your equipment rates.
NOTE: EVERYONE MUST BE OUT OF THE SYSTEM BEFORE YOU PERFORM THIS UTILITY!
===================================================================
To access the Repair Control Tables, click on the TOOLS button , then click on REPAIR TABLES and click on the box next to RETRO ACTIVE SET EQUIPMENT RATES.
1. Enter the Low Date of the Posted Equipment.
.png)
2. Enter the High Date of the Posted Equipment.
.png)
3. Enter appropriate Account Level 3 numbers.
.png)
4. Enter another Account Level 3 number, if applicable.
.png)
5. Once you've entered all of the appropriate information, you will receive the following confirmation screen. Click OK to continue; Click Cancel to return to the menu.
.png)
6. Once clicking OK, you will receive the following confirmation screen. Click OK.
.png)
7. Click CLOSE to exit the screen. .png){kind=small}
8. Click OK to restart the program.
.png)
9. Click YES to Exit the program.
.png)